Harman Crown CDi DriveCore 2×300 Amplifier – 600 W RMS – 2 Channel
Harman Crown Cdi DriveCore 2×300 Amplifier
Breathe life into your audio system with the Harman Crown Cdi Drivecore amplifier, an excellent performer available at a competitive cost.
The CDi DriveCore 2|300 has been designed to work in places like restaurants, retail businesses, and more. The 2|300 is a 2-channel amp with network control/monitoring, high-level DSP, a front-panel interface, and support for driving up to 100Vrms speaker loads without the use of a transformer, designed for ease of usage in a variety of applications.
Experience amazing audio fidelity as the amplifier reduces the variability of component values and increases reliability. Simple to use with a variety of embedded features like network controlling and monitoring, an advanced DSP circuit, and a front-panel interface, this Cdi amplifier is equipped with 2 channels and BLU Link RJ45 connectors to receive and send 256 channels.
A clear, natural, and well-structured amplifier, the Harman Crown Cdi DriveCore 2×300 Amplifier is sure to impress all with its performance and is here to stay in the market!
- DriveCore technology increases the strength of a weak electrical signal
- Network control and monitoring
- On-board Digital Signal Processor allows custom configuration
- Direct drive 70/100 Vrms Output
- Front panel interface
- Programmable GPIO/AUX Port allows to recalling presets, mute channels, monitor faults, power on/off the amplifier
- Smartly manages power at 8 ohms impedance
- 2 Audio channels with 600 W RMS
- BLU-link up to 256 channels
Feature Comparison
| CDi DriveCore Model | Channels | Network Control | DSP | Control Port | BLU link |
| 2|300 | 2 | Â | |||
| 2|300BL | 2 | ||||
| 4|300 | 4 | Â | |||
| 4|300BL | 4 | ||||
| 2|600 | 2 | Â | |||
| 2|600BL | 2 | ||||
| 4|600 | 4 | Â | |||
| 4|600BL | 4 | ||||
| 2|1200 | 2 | Â | |||
| 2|1200BL | 2 | ||||
| 4|1200 | 4 | Â | |||
| 4|1200BL | 4 |
Â
SPECIFICATIONS:
BLU link: Yes
Channels: 2
Sensitivity (for full rated power at 8 ohms): 0.7V RMS
Rated Power Output (per channel @ 4 ohms): 600 W
Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz – 20kHz) at 8 ohms): > 104dB
THD (full rated power, 20 Hz – 20 kHz): 0.35%
Damping Factor (20 Hz to 100 Hz): > 1000
Frequency Response (8Ω, 20 Hz – 20 kHz): +/-0.5dB
Crosstalk (below rated power) 20 Hz to 1 kHz: > 80dB
Impedance: 8Ω
Maximum Frequency Response: 20 kHz
Input Impedance (nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unbalanced
Ethernet: Yes
Operating Power Consumption: 300 W
Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion): 19 x 3.5 x 12.25
Weight: 14.56 lbs (6.6 kg)
Power Supply Connector: Standard IEC type 320 inlet for detachable connector 100 – 240V
Â
WHAT’S IN THE BOX:
1 x Crown Audio CDi 2×300-2 Channel DriveCore Series Power Amplifier with BLU Link (600W)
2 x Terminal Block
1 x Power Cord
Warranty: Limited 3-Year Warranty
